SIIG PCI 2S manual To Verify Windows NT 4.0 Installation, Windows2000, Windows XP

To Verify Windows NT 4.0 Installation

1.Click Start, Settings, Control Panel, double click Ports device icon.

2.Two new COM ports will be assigned when successfully installed.

Windows2000

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device (recommended), and click Next.

3.Check Specify a location, uncheck the other boxes, and click Next.

4.Insert the driver CD, type in D:\2000, then click OK. (Change D: to match your CD-ROM drive letter)

5.Click Next and Finish.

6.Repeat steps 1-5two more times.

7.Restart Windows to complete the installation.

Windows XP

1.At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next.

2.Insert the driver CD, check Include this location in the search, uncheck the other check box, type in D:\XP, and click Next. (Change D: to match your CD-ROM drive letter)

3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been tested for stability and compatibility.

4.Repeat steps 1-3three more times.

5.Restart Windows to complete the installation.

6