SIIG PCI 2S manual Driver Installation, Windows98/98SE

Driver Installation

This section provides information on how to install the CyberPro PCI 2S drivers.

Windows 95

1.At the Update Device Driver Wizard, click Next.

2.Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to match your CD-ROM drive letter)

3.From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in D:\9x, then click OK.

4.Restart Windows to complete the installation.

Windows98/98SE

1.At the Add New Hardware Wizard, click Next.

2.Select Search for the best driver for your device (Recommend), then click Next.

3.Insert the driver CD, check Specify a location, uncheck the other boxes, type in D:\9x, then click Next. (Change D: to match your CD-ROM drive letter)

4.Click Next, then Finish.

5.Repeat steps 1-4.

6.Restart Windows to complete the installation.

4