Section III. Installation

17

 

 

OUTDOOR INSTALLATION (Outdoor Shelter Installation in Canada, see page 14)

For outdoor installation with an exhaust grill, the heater must be placed in a suitable area on a level, noncombustible surface. Do not install the heater under an overhang with clearances less than 3 feet from the top of the heater. The area under an overhang must be open on three sides.

IMPORTANT!

•In an outdoor installation it is important to ensure water is diverted from overhanging eves with a proper gutter/drainage system. The heater must be set on a level foundation for proper drainage.

•Under certain conditions, “heavy rains or unusually high winds”, it may be necessary to install an outdoors vent. In this situation, use Outdoor Vent Kit, P/N 460424, (see below).

•This unit shall not be operated outdoors at temperatures below -20oF.

OUTDOOR INSTALLATION

VENTING GUIDELINES

4'

 

3'

B

SIDE VIEW

A

 

 

4'

 

 

Property Line

4 ft.

 

C

D

 

 

Window

 

4'

 

4 ft.

Exhaust Grill

 

 

 

(Vent)

 

 

Building

 

 

 

 

 

Vent Termination:

Heater

A Must be at least 3 ft. above any forced

(side view)

air inlet located within a 10 ft. radius.

 

 

 

Figure 13.

Must be located 4 feet away from the building wall,

 

and at the following distances away from any door,

 

 

window, or gravity air inlet:

 

 

B

4 ft. below,

C 4 ft. horizontally, or

D Check local building codes for setback requirements.

OUTDOOR VENT KIT

1.Remove the six (6) retaining screws from the old exhaust grill and discard the screws, gasket, and exhaust grill as shown in Figure 14.

2.Install the Outdoor Vent Kit, (P/N 460424), as shown in Figure 15. Make sure the holes in the gasket, metal flange of the main vent assembly, and heater cover are aligned before securing into place using the six (6) screws provided in the Outdoor Vent Kit.

 

 

EXHAUST GRILL

METAL FLANGE

 

 

SCREWS (6)

 

 

SCREWS (6)

 

 

 

 

GASKET

 

GASKET

 

 

 

Figure 14.

 

 

Figure 15.

CAUTION

If installing the heater next to or near an air conditioning unit or a heat pump, allow a minimum of 36 in. between the air conditioning unit and the heater.

Rev. G • Rév. G 5-27-04

P/N • Réf. 472090

Page 16 Page 18
Page 17
Image 17
Pentair 200 installation manual Outdoor Vent KIT, Outdoor Installation Venting Guidelines Side View
Page 16 Page 18

200 specifications

The Pentair 200 is a sophisticated pool and spa control system designed to offer unmatched convenience, efficiency, and safety for users looking to enhance their aquatic experience. With cutting-edge technologies and a user-friendly interface, the Pentair 200 stands out as a leading solution in the pool management industry.

One of the main features of the Pentair 200 is its advanced automation capabilities. It allows users to control various aspects of their pool and spa, including lighting, heating, and filtration, all from a single control panel or a mobile app. This automation not only enhances usability but also ensures optimal performance, significantly reducing energy consumption compared to manual systems.

The integration with smart technology is another hallmark of the Pentair 200. Users can access the system remotely using their smartphones or tablets, allowing them to manage their pool settings from anywhere. This feature is particularly beneficial for those who may want to ensure their pool is ready for a gathering or simply wish to make adjustments while away from home.

The Pentair 200 is also designed with safety features in mind. It includes multiple protection mechanisms to prevent overheating and ensure regular operational safety, contributing to peace of mind for pool owners. Moreover, the easy-to-understand interface makes programming the system a breeze, even for those who may not be technologically inclined.

Efficiency is paramount in pool management, and the Pentair 200 excels in this area with energy-efficient technologies. Its variable-speed pump capabilities optimize energy usage depending on the specific needs of the pool, thereby resulting in lower utility bills and a reduced environmental impact.

Another notable characteristic is the system's durability and reliability. Constructed with high-quality materials and backed by Pentair's reputation in the industry, the 200 model is built to withstand various environmental conditions and provide consistent performance over time.

In summary, the Pentair 200 is a cutting-edge pool control system that enhances convenience, safety, and energy efficiency. Its advanced automation and smart technology integration make it a standout choice for modern pool owners. With the ability to manage their aquatic environments effectively and efficiently, users can enjoy their pools and spas with greater peace of mind.
Top Page Image Contents