Silicon Image SSD-D16G(I)-3600 manual Initialize Drive Parameters 91h

ATA COMMAND BLOCK AND SET DESCRIPTION SSD-DXXX(I)-3600 DATA SHEET

Initialize Drive Parameters — 91h

Initialize Drive Parameters allows the host to set the sector counts per track and the head counts per cylinder to 1 Fixed. Upon issuance of the command, the device sets the BSY bit and associated parameters, clears the BSY bit, and issues an interrupt.

Table 38: Initialize Drive Parameters — 91h

Register	D7	D6		D5	D4	D3	D2	D1	D0
Feature					X
Sector Count			Sector Count (Number of Sectors)
Sector Number					X
Cylinder Low					X
Cylinder High					X
Drive Head	X	0		X	Drive		Head Number
						(Number of Heads — 1)
Command					91h

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

3600D-04DSR PAGE 39 FEBRUARY 2, 2009