Silicon Laboratories Network Card Figure 13. TCP/IP Configuration Wizard Project Generation

Ethernet-DK
Rev. 0.6 17
5. Save the selected configuration using the FileSave As menu.
6. Generate a new project with supporting firmware by selecting Generate Project from the File menu (see
Figure 13).
7. When prompted for a folder to save the project, browse to an empty directory or create a new directory.
Note: Any files in the selected directory will be overwritten. Click the OK button.
8. Click the OK button when the “Project generated successfully” message appears.
9. Close the TCP/IP Configuration Wizard.
Figure 13. TCP/IP Configuration Wizard Project Generation