Silicon Laboratories Network Card - page 18

Ethernet-DK

18 Rev. 0.6

6.2.2. Programming the MCU

We will now build the project created by the TCP/IP Configuration Wizard and download the firmware to the MCU

using the Silicon Laboratories IDE.

1. From the Windows Start menu, start the Silicon Laboratories IDE. The shortcut will be under the

StartSilicon Laboratories menu. Alternatively, the Silicon Labs IDE can be started by double-clicking

IDE.exe located by default in the “C:\SiLabs\MCU” directory.

2. After the splash screen disappears, open the generated project using the ProjectOpen Project menu

command. Browse to the directory where the TCP/IP project was generated. Select TCPIP_Project.wsp, and

click the Open button.

Note: An example project is available by default in the

C:\SiLabs\MCU\Examples\C8051F12x_13x\Ethernet\HTTP\web-server-2 directory. This project is identical to

the one generated in the previous steps.

3. If you would like to view the source code, double-click on main.c on the left hand side of the screen. Source

code modification is not required to run this demo.

4. Select the Keil tools by going to ProjectTool Chain Integration and selecting the Keil preset under the

Preset Name drop down menu. Press No when the Save Preset? dialog appears.

Contents

Main Ethernet-DK EMBEDDED ETHERNET DEVELOPMENT KIT USERS GUIDE 2. Kit Contents Rev. 0.6 3 3. Hardware Setup USB Port Figure 2. Embedded Ethernet Development Board Attachment Figure 3. Embedded Ethernet Development Kit Debug Connections C8051F120 Target Board 4. Network Setup Figure 4.Embedded Ethernet Network Connection (Standard Cable) Figure 5.Embedded Ethernet Network Connection (Crossover Cable) Table 1. Ethernet Cable Comparison 4.1. Network Setup Procedure 4.2. Selecting an IP Address for the Embedded System 4.3. IP Address Selection Example Figure 6. IP Address Selection Example 10 10 10 163 (decimal) 5. Software Setup Page 6. Embedded Ethernet Tutorial 6.1. Stage 1Basic Web Server Figure 7. TCP/IP Configuration Wizard Protocol Selection Page Figure 9. TCP/IP Configuration Wizard Project Generation Page Page Page Figure 10. Pinging the Embedded System Figure 11. Embedded Web Server 6.2. Stage 2Basic Web Server with DHCP and Netfinder Capability Figure 12. TCP/IP Configuration Wizard Protocol Selection Figure 13. TCP/IP Configuration Wizard Project Generation Page Page Page Page Page Page Page 6.3. Stage 3Configuring MAC and IP Addresses over the Serial Port Figure 21. Waiting for User Input Figure 22. Successful Programming of IP Address 6.4. Stage 4Adding Web Server Content Figure 23. Modifying the HTML Source Figure 24. Automating the Conversion Using a Batch File Figure 25. Embedded Web Server with Modified Content Page 7. Example Source Code 7.1. HTTP Web Server 7.2. SMTP Mail Client 7.3. TCP Echo Client/Server 7.4. UDP Echo Client/Server 8. C8051F120 Target Board Figure 27. C8051F120 Target Board Page 9. AB4 Ethernet Development Board Figure 29. AB4 Ethernet Development Board AB4 Ethernet Development Board Table 2. AB4 Board Signals 9.1. Expansion I/O Connector (J1) Table 3. J1 Pin Descriptions Page 10. Silicon Laboratories IDE (Integrated Development Environment) 10.1. System Requirements 10.2. Assembler and Linker 10.3. Evaluation C51 C Compiler 10.4. Using the Keil Software 8051 Tools with the Silicon Laboratories IDE APPENDIXSUPPORTED PROTOCOLS Link/Physical Layer: Internet Layer: Transport Layer: Application Layer: DOCUMENT CHANGE LIST Revision 0.3 to Revision 0.4 Revision 0.4 to Revision 0.5 Revision 0.5 to Revision 0.6 Page CONTACT INFORMATION