Silicon Laboratories Network Card - page 8

Ethernet-DK

8 Rev. 0.6

4. Unselect the “Install Raisonance Evaluation 8051 Toolset” option and select “Install Keil Evaluation 8051

Toolset”. Then press the Install button.

5. Follow the installation prompts to install the development tools. The following applications will be installed:

The Silicon Laboratories IDE will be installed by default in the C:\SiLabs\MCU directory.

The Embedded Ethernet examples will be installed by default in the C:\SiLabs\MCU\Examples\C8051F12x\Ethernet

directory.

The TCP/IP Configuration Wizard will be installed by default in the C:\SiLabs\MCU\TCP-IP Config directory.

Shortcuts to the applications will be placed in the StartPrograms menu.

6. To compile the projects discussed in this tutorial, the Keil tools must be enabled to the 4k-code limited

evaluation version. See “AN104: Integrating Keil 8051 Tools into the Silicon Labs IDE" for more information.

Application notes can be found on the Silicon Labs Application Notes webpage:

http://www.silabs.com/products/mcu/Pages/ApplicationNotes.aspx.

Contents

Main Ethernet-DK EMBEDDED ETHERNET DEVELOPMENT KIT USERS GUIDE 2. Kit Contents Rev. 0.6 3 3. Hardware Setup USB Port Figure 2. Embedded Ethernet Development Board Attachment Figure 3. Embedded Ethernet Development Kit Debug Connections C8051F120 Target Board 4. Network Setup Figure 4.Embedded Ethernet Network Connection (Standard Cable) Figure 5.Embedded Ethernet Network Connection (Crossover Cable) Table 1. Ethernet Cable Comparison 4.1. Network Setup Procedure 4.2. Selecting an IP Address for the Embedded System 4.3. IP Address Selection Example Figure 6. IP Address Selection Example 10 10 10 163 (decimal) 5. Software Setup Page 6. Embedded Ethernet Tutorial 6.1. Stage 1Basic Web Server Figure 7. TCP/IP Configuration Wizard Protocol Selection Page Figure 9. TCP/IP Configuration Wizard Project Generation Page Page Page Figure 10. Pinging the Embedded System Figure 11. Embedded Web Server 6.2. Stage 2Basic Web Server with DHCP and Netfinder Capability Figure 12. TCP/IP Configuration Wizard Protocol Selection Figure 13. TCP/IP Configuration Wizard Project Generation Page Page Page Page Page Page Page 6.3. Stage 3Configuring MAC and IP Addresses over the Serial Port Figure 21. Waiting for User Input Figure 22. Successful Programming of IP Address 6.4. Stage 4Adding Web Server Content Figure 23. Modifying the HTML Source Figure 24. Automating the Conversion Using a Batch File Figure 25. Embedded Web Server with Modified Content Page 7. Example Source Code 7.1. HTTP Web Server 7.2. SMTP Mail Client 7.3. TCP Echo Client/Server 7.4. UDP Echo Client/Server 8. C8051F120 Target Board Figure 27. C8051F120 Target Board Page 9. AB4 Ethernet Development Board Figure 29. AB4 Ethernet Development Board AB4 Ethernet Development Board Table 2. AB4 Board Signals 9.1. Expansion I/O Connector (J1) Table 3. J1 Pin Descriptions Page 10. Silicon Laboratories IDE (Integrated Development Environment) 10.1. System Requirements 10.2. Assembler and Linker 10.3. Evaluation C51 C Compiler 10.4. Using the Keil Software 8051 Tools with the Silicon Laboratories IDE APPENDIXSUPPORTED PROTOCOLS Link/Physical Layer: Internet Layer: Transport Layer: Application Layer: DOCUMENT CHANGE LIST Revision 0.3 to Revision 0.4 Revision 0.4 to Revision 0.5 Revision 0.5 to Revision 0.6 Page CONTACT INFORMATION