Silicon Laboratories Network Card - page 20

Ethernet-DK
20 Rev. 0.6
8. Click the Connect button in the toolbar or select Debug  Connect from the menu .
Note: If you receive the error message “Communication could not be established with the specified serial
adapter”, open the Connection Options Dialog by selecting
Options  Connection Options from the menu.
Verify that the
USB Debug Adapter is selected and that the debug interface is set to JTAG.
9. Download the project to the target by clicking the Download Code button in the toolbar.
10. Run the demo by clicking the Go button in the toolbar,
selecting Debug  Go from the menu, or pressing the
shortcut key
F5 .
.