Setting up and connecting

Requirements for the set-up location

GB

For safe and faultless operation of the device the set-up location must

 

 

fulfill the following provisions:

 

The device must be placed on a firm, flat and level surface.

 

Do not place the device in a hot, wet or very damp environment or

 

in the vicinity of flammable materials.

 

Place the device so that it is not subjected to direct sunlight.

 

Connecting to a computer

System prerequisites

‹You will need a computer with a vacant USB port and with the operating system Windows® XP, Windows® Vista or Windows® 7 from the Microsoft® corporation.

Installation of the drivers and the

ArcSoft PhotoImpression 6 programme

NOTICE

In these operating instructions only the programme sections are described that you will need for scanning your slides and/or film negatives. You can find further information in the programme's on-line help.

The illustrations and descriptions refer to the operating system Microsoft® Windows® Vista. The illustration depictions can differ, depending on the display settings, with other operating systems.

12

KH 2610

Page 10
Image 10
Silvercrest KH2610 08/2009-V3 operating instructions Requirements for the set-up location, Connecting to a computer