Panasonic DMC-FX38 Press 3/4 to select PC, and then press MENU, Double-click DCIM folder

Connecting to other equipment

2	Press 3/4 to select [PC], and then press [MENU/
	SET].

•If [USB MODE] (P22) is set to [PC] in the [SETUP] menu in advance, the camera will be automatically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient.

•When the camera has been connected to the PC with

[USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] again.

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT SET MENU

3 Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

4

5

Double-click [DCIM] folder.

Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.

∫Disconnecting the USB connection cable safely

•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5G; optional).

•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

•With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory card.

•If the camera is connected in clipboard mode, the built-in memory data is displayed even if a card is inserted.

90 VQT1S07