Advanced (Recording pictures)

When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].

If [ON] is selected when the birthday or name has not been registered, the setting screen appears automatically.

4Press [MENU/SET] to finish.

To cancel [AGE] and [NAME]

Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.

Note

The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).

If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].

The focus range becomes the same as macro mode. [5 cm (Wide)/1 m (Tele) to ¶]

[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].

If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the lower left of the screen for about 5 seconds, along with the current date and time.

If the age is not properly displayed, check the clock and birthday settings.

The birthday setting and name setting can be reset with [RESET].

The initial setting for [AF MODE] is [š].

í[PET]

Select this when you want to take pictures of a pet such as a dog or a cat.

You can set your pet’s birthday and name. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P78).

For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P47.

Note

The initial setting for the AF assist lamp is [OFF].

[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].

The initial setting for [AF MODE] is [ ].

The focus range becomes the same as macro mode. [5 cm (Wide)/1 m (Tele) to ¶]

Refer to [BABY1]/[BABY2] for other information about this mode.

ï[SUNSET]

Select this when you want to take pictures of sunset view. This allows you to take vivid pictures of the red colour of the sun.

9[HIGH SENS.]

This mode minimises the jitter of the subjects, and enables you to take pictures of these subjects in dimly lit rooms. (Select this for high-sensitivity processing. The sensitivity automatically switches to between [ISO1600] and [ISO6400].)

Picture size and aspect ratio

Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET] to set.

3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.

48 VQT1S07

Page 48
Image 48
Panasonic DMC-FX38 operating instructions Pet, Sunset, High Sens, Press MENU/SET to finish To cancel AGE and Name