Panasonic DMC-FX38 TV, PC and printer, Others, The picture does not appear on the television

Others

TV, PC and printer

The picture does not appear on the television.

•Is the camera connected to the TV correctly?

>Set the TV input to external input mode.

•Output from the [COMPONENT OUT] socket is not possible when it is connected to the PC or the printer.

>Connect it only to the TV.

The display areas on the TV screen and the camera’s LCD monitor are different.

•Depending on the TV model, the pictures may be extended horizontally or vertically or they may be displayed with their edges cut off.

The motion pictures cannot be played back on a TV.

•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

>Connect the camera to the TV with the AV cable (supplied), or with the component cable (DMW-HDC2; optional), and then play back the motion pictures on the camera. (P96, 97)

The picture is not displayed fully on the TV.

>Check [TV ASPECT] setting. (P23)

The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognised by the PC correctly?

>Set to [PC] in [USB MODE]. (P22, 89)

The card is not recognised by the PC. (The built-in memory is recognised.)

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

•When the mode dial is set to [¨], contents of the built-in memory will be displayed.

>Set the mode dial to anything except [¨].

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer which does not support PictBridge.

>Set to [PictBridge(PTP)] in [USB MODE]. (P22, 92)

The ends of the pictures are cut at printing.

>When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

Others

An unreadable language was selected by mistake.

>Press [MENU/SET], select the [SETUP] menu icon [] and then select the [~] icon to set the desired language. (P23)

112 VQT1S07