Set the language displayed on the screen

[VIDEO OUT]

Set to match the colour television system in each country. (Playback mode only)

[NTSC]: Video output is set to NTSC system.

[PAL]: Video output is set to PAL system.

•This will work when the AV cable is connected.

[TV ASPECT]

Set to match the type of TV. (Playback mode only)

[W]: When connecting to a 16:9 screen TV.

[X]: When connecting to a 4:3 screen TV.

•This will work when the AV cable is connected.

}[SCENE MENU]

Set the screen that will appear when a scene mode has been selected.

[OFF]: The recording screen in the currently selected scene mode appears.

[AUTO]: The [SCENE MODE] menu screen appears.

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5G; optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If you cannot format, contact the dealer or your nearest Service Centre.

~[LANGUAGE]

Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

DEMO [DEMO MODE]

Select this to display [JITTER, SUBJ. MOVE DEMO.] or the camera’s features.

[AUTO DEMO]: The camera’s features are displayed as a slide show.

AJitter detection demonstration

BMovement detection demonstration

•In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.

•Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. Press [MENU/SET] to close [AUTO DEMO].

•[JITTER, SUBJ. MOVE DEMO.] is an approximation.

•[AUTO DEMO] has no TV output capability.

A B

VQT1S07 23