Panasonic DMC-FX38 OFF „ Auto Power LCD, … Power LCD, REC. Info Pattern, Auto LCD OFF

Preparation

LCD

[LCD MODE]

These menu settings make it easier to see the LCD monitor when you are in bright places.

[OFF]

„[AUTO POWER LCD]:

The brightness is adjusted automatically depending on how bright it is around the camera.

…[POWER LCD]:

The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.

•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear differently from actuality on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of sunlight etc. shining on it, use your hand or another object to block the light.

•The number of recordable pictures decreases in Auto Power LCD mode and Power LCD mode.

[GUIDE LINE]

Set the pattern of the guide lines displayed when taking pictures. You can also set whether or not to have the recording information displayed when the guide lines are displayed. (P35)

[REC. INFO.]:	[PATTERN]:
[OFF]/[ON]	[ ]/[ ]

• The [PATTERN] setting is fixed to [] in the Intelligent auto mode and the clipboard mode.

[HISTOGRAM]

This allows you to set either to display or not display the histogram. (P36)

[OFF]/[ON]

q[ECONOMY]

You can conserve the battery life by setting these menus.

Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.

p[POWER SAVE]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

•Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].

•[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode and the clipboard mode.

•[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

•The status indicator lights while the LCD monitor is turned off. Press any button to turn on the LCD monitor again.

•[AUTO LCD OFF] does not work while operating menu or playback zoom.

VQT1S07 21