6.Press the button MEM SET/AMS h once again to conclude the saving. The display flashes for 15 seconds, after that the sav- ing is finalised.

Setting alarm times (Alarm 1–4)

You can programme four alarm times with your kitchen radio.

Alarm function

Symbol in the display o

Acoustic signal

Radio

Switched off

no symbol

1.In automatic mode, press one of the ALARM buttons 1–4 ruto select the location for the to be programmed alarm memory. In the display o the last set alarm time and the symbol for the type of alarm blink for 15 seconds.

2.Press the buttons UP/DOWN1(/l to set the desired alarm time.

3.Repeatedly press the ALARM button pre- viously pressed until the desired alarm function (see table above) is indicated in the display o.

4.Repeatedly press the button TIMER g to set the weekdays on which you require the alarm function: You can select between "workdays" (Mo, Tu, We, Th, Fr), "week- ends" (Su, Sa) and "every day" (Su, Mo, Tu, We, Th, Fr, Sa). Thereby, orientate yourself on the weekday indicator in the

display o:

 

Mo

= Monday

Tu

= Tuesday

We

= Wednesday

Th

= Thursday

Fr

= Friday

Sa

= Saturday

Su

= Sunday.

5.If you hold the button TIMER g pressed down for 2 seconds, you can also,

through repeated brief pressing of the TIMER g button, select a specific week- day (e.g. only "We"). The selected setting is indicated in the display o.

6.To return to the selection of workdays, weekends or whole weeks, once again hold the button TIMER g pressed down for 2 seconds.

7.After 15 seconds the blinking in the dis- play stops and your input is saved. The ap- pliance then returns to automatic modus.

When the alarm signal sounds...

and the alarm function "Radio" has been selected, the radio plays for one hour at a pre-defined alarm volume. To exit, press one of the ALARM buttons 1–4 ru.

and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes, with an increasing volume. To exit, press one of the ALARM buttons 1–4 ru.

Radio operation

For radio reception, completely unwind the wire aerial e and, with the radio switched on, determine the most favourable position- ing for it.

Switching the radio on and off

1.To switch the radio function on, press the button ON/OFF 2). In the display o the currently selected frequency is shown.

2.Press the button ON/OFF 2) once again to switch the radio off and return the ap- pliance to the automatic modus.

Manual station selection

1.Briefly press the button UP1( repeat- edly to search for stations with a higher frequency than the one shown in the dis- play o.

2.Briefly press the button DOWNl repeatedly to search for stations with a lower frequency than the one shown in the display o.

- 8 -

Page 10
Image 10
Silvercrest KH 2398 manual Radio operation