Setting up and connecting
Disposal of packaging
GB | The packaging protects the device from transpot damages. The packaging |
| |
| materials are selected from the point of view of their environmental friendliness |
| and disposal technology and are therefore recyclable. |
| The recirculation of packaging into the material circuit saves on raw material and |
| reduces generated waste. Dispose of packaging material that is no longer needed |
| according to the regionally established regulations. |
NOTE
►If possible preserve the device's original packaging during the warranty period so that, in the event of a warranty claim, you can package the device properly for return.
Requirements for the setup location
For safe and trouble free operation of the device the setup location must fulfill the following provisions:
■The device must be placed on a firm, flat and level base.
■Do not place the device in a hot, wet or very damp environment or in the vicinity of flammable materials.
■Do not remove the device's feet. Otherwise proper air circulation can not be guaranteed.
■The mains power socket must be easily accessible so that the power cable can be easily disconnected in an emergency.
■The surface areas of furniture may possibly contain components that could affect the device's rubber feet, softening them. If necessary place a base under the device's feet.
■Operating temperature range: +5 to +40 °C
■Humidity (no condensation): 5 - 90 %
12 | USB Record Player KH 2430 |
