7.After baking the last donut remove the plug from the power socket and allow the appliance to cool with the lid open.
Cleaning and care
Important!:
Never open the housing of the appliance. There are no operating elements inside. When the housing is open, there is the risk of receiving a fatal electrical shock. Before cleaning the appliance, ....
•Remove the plug from the power socket and allow the device to cool down completely.
Under no circumstances may the components of the appliance be submerged in water or other liquids! There would be the risk of a fatal electric shock upon the next use of the appli- ance should moisture be present in the voltage conducting elements .
•First of all, clean the baking surfaces with a dry paper towel to soak up the grease residue.
•Then clean all surfaces and the power cable with a lightly moistened cloth. Always dry the appliance well before using it again.
•Do not use detergents or solvents. They could not only damage the appliance, they can also leave traces that would be baked into the next donuts.
In the case of stubborn residues:
•NEVER make use of hard objects. These could damage the coatings of the baking surfaces.
•It is better to lay a wet wash cloth on the encrusted residues in order to soften them.
Storage
Allow the appliance to cool off completely before putting it into storage.
Wind the power cable around the cable retainer w on the bottom of the appliance.
Store the appliance in a dry location.
- 4 -