GB
IE
Troubleshooting
Problem | Cause | Remedy | |
| • The espresso powder is too | • Reprepare the espresso, however, | |
| moist and/or compressed | this time do not compress it so | |
| too tight. | tightly, or exchange it completely. | |
The espresso no | • No water in the water tank 1. | • Fill the water tank 1 with water. | |
longer flows out | |||
|
| ||
| • The holes in the sieve carrier | • Clean the sieve carrier w. | |
| openings are blocked. | ||
|
| ||
| • The sieve carrier w is not | • Correctly insert the sieve carrier | |
| correctly inserted. | w. | |
the espresso drips over |
|
| |
the edges of the sieve | • The sieve carrier openings | • Clean the sieve carrier w. | |
carrier w instead of | are blocked. | ||
| |||
from the openings. |
|
| |
| • There are espresso powder | • Clean the espresso powder | |
| residues on the edges of the | residues from the edges of | |
| sieve carrier w. | the sieve carrier w. | |
| • The appliance was not | • Preheat the appliance. | |
| preheated. | ||
|
| ||
The espresso is cold. | • The green | • Wait until the green | |
lamp 4 has not yet glowed. | control lamp 4 glows. | ||
| |||
| • The cups were not prewarmed. | • Prewarm the cups. | |
| • The water tank 1 is empty. | • Fill the water tank 1 with water. | |
Noisy operation | • The water tank 1 is not properly |
| |
of the pump. |
| ||
| inserted, meaning that water | • Correctly insert the water tank 1. | |
| cannot enter into the appliance. |
|
18 | Espresso Machine |