Sim2 Multimedia HT300 XTRA-H Keyboard Pad, RS232 INTERFACE CONNECTOR, Menu, Auto, Focus-Esc

its output can be set with the “Screen control” adjustment in the “Aspect” menu. This output allows reduction in the area of a 16:9 screen, into a 4:3 format, by activating a screen masking system (refer to screen manufacturer for further information).

RS232 INTERFACE CONNECTOR

It is possible to control the projector through a personal com- puter. First, load the appropriate projector control software onto your PC, then simply connect this input to a cable from your PC’s RS232 serial port (Fig. 23).

ZOOM

2

1

RGB

4	GRAPHICS
	(RS
CONTROL

R/Cr

G/Y

B/Cb

HV

CAUTIO			replace
risk	of fire,		type
	with	same
only			.
	rating		fuse
and
				AUDIO
	5	HDMI		OUT
3

7 KEYBOARD PAD

Eight push buttons, at the rear of the projector, will allow com- plete operation without the use of the remote control.

Switches off to stand-by.

Up/Down/Left/Right arrow keys

Navigate through and make adjustments to the On Screen menus.

Arrow Up/Down switch on from stand-by and recall Source Selection menu.

Fig. 23

Menu

Activates the On Screen Display menus. Navigates Menu pages.

Auto

Selects Auto Adjust

(automatic optimisation of the displayed image).

-Focus-Esc

De-activates the On Screen Display and gives access to the lens Zoom/Focus adjustment functions.

13