9 ON SCREEN MENU
SOURCE SELECTION
The input selection menu (Inputs) is called by pressing 0 on the remote control and, when no other menu is displayed, using the and keys on the keypad. To select an input, scroll the list with the and keys until the desired input is highlighted, then press .
Display of the input selection menu is terminated by pressing the ESC key, or when the time allowed for displaying the on- screen menu has lapsed (set in the
Input 3 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher. The association between the input and the type of signal is made from the
Inputs
1 | VIDEO | 1 |
|
2 | 2 |
| |
3 | COMPONENT/RGBS 3 | RGBS 15kHz | |
4 | GRAPHICS RGB | 4 |
|
5 | HDMI | 5 |
|
|
|
| Fig. 26a |
Inputs |
|
| |
1 | VIDEO | 1 |
|
2 | 2 |
| |
3 | COMPONENT/RGBS |
| RGBS 15kHz |
4 | GRAPHICS RGB | 4 | RGBS |
5 | HDMI | 5 | YCrCb 15kHz |
|
|
| YCrCb |
|
|
| Fig. 26b |
After selecting the source signal (by means of the and keys), press MENU+/MENU - to confirm and close the pull- down menu; the value you have just set will be displayed on the right of the < symbol.
As with the other inputs, you can now select the input just set by pressing the key.
During the short time it takes to find the signal, a box appears showing the signal requested. As soon as the signal is shown
in the box additional information is displayed concerning the video standard (for video signals) or resolution (for graphic signals), and format.
Fom the SETUP menu it is possible to choose to visualize or not this information, for more details check the “SOURCE INFORMATION” in “MENU” section.
MAIN MENU
To access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the re- mote control.
The main menu is divided into four windows, PICTURE, IMAGE, SETUP and MENU, in which the various adjustments are grouped according to the frequency of use. Use and to select the line corresponding to the adjustment you wish to make (Fig. 27).
Picture
Brightness | 60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Contrast | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Color | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Tint | 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Sharpness | 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Filter | 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Cinema Mode | Off |
| Auto | ||||||||||
Video Type | Normal | VCR1 VCR2 | |||||||||||
Noise Reduction | Auto |
|
|
|
|
|
|
|
|
| Fig. 27 | ||
The various menus only offer the relevant adjustments in accordance with the type of input signal displayed (e.g. certain typical adjustments for video signals, not necessary for graphic signals, do not appear on the menus, and vice versa).
Some adjustments (e.g. BRIGHTNESS and CONTRAST) are associated with a numerical value that can be varied within the set limits using the keys / . For others (e.g. VIDEO TYPE) you can choose among three options presented on the same
/ ).
15
