IMAGE
This menu features adjustments relating to picture position, aspect ratio, etc.
ASPECT
This adjustment allows you to change the dimensions and aspect ratio (relationship between width and height) of the displayed image. There are five preset aspects available and three personalised aspects (with
You can also select the required aspect ratio by repeatedly
pressing the 
key, or by pressing 
and a numerical key (1...8). The following aspects are available.
NORMAL: projects the image occupying the full height of the screen while maintaining the aspect ratio of the input signal. When the input signal aspect ratio is 4:3 black vertical bands are displayed on the right and left of the picture.
ANAMORPHIC: allows a 16:9 picture to be displayed correctly.
LETTERBOX: serves to display 4:3 letterbox image (with source signal having black bands above and below the picture) so that it fills the 16:9 screen and maintains the correct aspect ratio.
PANORAMIC: this aspect stretches the 4:3 image, slightly crop- ping the upper and lower parts.
Panoramic is ideal for displaying a 4:3 image on the 16:9 screen of the Display.
PIXEL TO PIXEL: this aspect displays the image as it is input without adapting it to the screen.
The image is projected in the centre of the screen and if its ho- rizontal and/or vertical dimensions are smaller than the display, it is bounded by vertical and/or horizontal black bands.
USER 1, 2, 3: When none of the preset formulas are suitable, the User formulas are available, with the facility for continuous horizontal and vertical adjustment of picture size.
SCREEN CONTROL
For each aspect chosen, the SCREEN CONTROL command allows you to reframe the screen to a variety of aspect ratios and screen size, using an appropriate
COLOR TEMPERATURE
The color temperature adjustment is made by positioning the white point inside CIE cromaticity diagram.
The systems allows to choose from 36 predefined white points inside the neutral color area (Fig.29).
| ��� |
|
|
|
��� |
| ��� |
|
|
|
|
|
| |
| ����� | ��� |
|
|
��� |
|
|
| |
|
|
|
| |
|
|
| ��� |
|
� ��� |
|
| ��� |
|
| ���� | ���� |
| |
|
|
| ||
|
| ���� | ���� | ��� |
|
| ���� |
| |
|
| ��� | ��� |
|
|
| �������� | ��� | |
��� |
|
| ||
|
|
|
|
���
���
����
���
��� | ��� | ��� | ��� | ��� |
|
| � |
|
|
Fig. 29
The correlated color temperature varies along horizontal lines, low temperatures are present in the right side (where the red component is increased), in the left side of the diagram you can find high temperature values ( in which blue component is higher). The points along the lower horiziontal line (Fig.30) represent colors that belong to the black body curve.
��
Fig. 30
18
