Simaudio Preamplifier and D/A converter owner manual Full Function Remote Control Operation

Models: Preamplifier and D/A converter

1 27
Download 27 pages 399 b
Page 14
Image 14
Full Function Remote Control Operation

MOON Stargate Processor

Full Function Remote Control Operation

The supplied remote control (figure 9) can operate up to eight (8) different components and is programmable via a learning mode. The eight (8) buttons located on the top 2 rows allow you to select the component you wish to operate. Please refer to the next section “Remote Control Programming” for instructions on how to manually program this remote control.

To operate the Stargate with this remote control you must first press the button labeled ‘AVC’ on the top left corner.

POWER: Puts the Stargate into “Standby” mode. This button cannot turn the unit on; you must use one of the input selection buttons located further down on the remote (i.e. DVD, LD, VCR1, VCR2, etc.).

MUTE: Places the unit in Mute mode – no output volume.

T/V: Toggle between NTSC and PAL video system (for OSD only).

CH ! and CH ": Seek up/down AM/FM tuner frequency.

VOL ! and VOL ": Adjusts output volume up/down.

GUIDE: The “Status Display” appears on screen.

MENU: The on screen “Setup” Menu appears on screen.

EXIT: Exit from the on screen Menus.

SELECT ! # " $ cursors used for SYSTEM SETUP functions

DVD, LD, VCR1, VCR2, SAT, AUX, CD, TV, TUNER, TAPE and 7.1:

 

Selects a source input and turns unit on from “Standby” mode.

 

SURR: Places the processor into Surround mode.

 

STEREO: Places the processor into Stereo mode.

 

MUSIC 7: Places the processor into 7.1 music mode.

 

MODE: Toggles between Dolby Surround Pro Logic® II Music, Dolby

 

Surround Pro Logic® II Movie, DTS Neo:6® Music and DTS

 

NEO:6® Cinema modes.

 

BASS: Sets the bass trim for the currently selected input.

 

1 thru 10: AM/FM Tuner Presets. To save the current radio station as

 

a ‘Preset’, press and hold one of the 10 preset buttons until

 

the sound mutes for approximately ½ second.

 

ZONE: Activate remote for ‘Zone 2’ function control (i.e. volume, seek,

 

input source selection, mute, off)

 

LIGHT: Turns on the remote’s backlighting (will auto shut off).

Figure 9

SHIFT: Toggle between AM and FM on the tuner.

 

This remote control uses four (4) AAA batteries which are included.

____________________________________________________________________________________

Full Function Remote Control Operation

14

Page 14
Image 14
Simaudio Preamplifier and D/A converter owner manual Full Function Remote Control Operation, MOON Stargate Processor