Operation

OPERATING THE SNOWTHROWER

1.Rotate the discharge chute to the desired direction.

2.Set the speed selector to the desired forward speed.

3.Fully press and hold the auger control (C, Figure 5) on the right-hand grip to begin auger rotation. To dis- engage the auger, completely release the lever.

4.Fully press and hold the traction drive control lever (B, Figure 5) on the left-hand grip to engage the trac- tion drive and begin moving the snowthrower. To dis- engage the traction drive, completely release the lever.

If the auger control (C) and traction control (B) are depressed simultaneously, the Free-Hand mecha- nism will be activated. When activated, the auger control (C) will remain engaged when its control lever is released so long as the traction drive control (B) is engaged. This allows the operator to rotate the dis- charge chute (D) without stopping.

Releasing the traction control (B) will disengage both the auger and traction drive.

5.Select forward or reverse speeds as needed using the speed selector (A, Figure 5). Release the drive control lever whenever changing drive speeds.

NOTE: After 5 - 10 hours of use, it may be necessary to adjust the tension on the traction drive rod. See "Traction Drive Clutch Rod Adjustment" in the Adjustments Section for the adjustment procedure.

GROUND SPEED SELECTOR

Use the speed selector (A, Figure 5) to control the drive speed of the snowthrower. There are five forward speeds and two reverse speeds.

Use the lower speeds to blow deep or wet snow. Use the higher speeds to blow light snow or to drive the snow- thrower without blowing snow.

To change speeds, first release the traction drive control lever (B, Figure 5), then move the speed selector to the desired speed setting. Fully press the traction drive con- trol lever to resume operation.

ENGINE SPEED

Run the engine at full throttle when operating. Use the engine throttle lever (See Figure 6) to set the engine speed. Slide the throttle lever UP to increase engine speed, and DOWN to reduce speed.

C

A

D

B

 

Figure 5. Operator's Control Position

A.

Speed Selector

C. Auger Control

B.

Traction Drive Control

D. Chute Direction Control

Throttle

Lever

Throttle

Lever

Figure 6. Engine Speed Selection

14

Page 17 Page 19
Page 18
Image 18
Simplicity 1693984, 1694439, 1694242, 1693985, 1694435 Operating the Snowthrower, Ground Speed Selector, Engine Speed
Page 17 Page 19

1694439, 1694435, 1693985, 1694242, 1693984 specifications

Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 represent a series of innovative solutions in the realm of technology, showcasing an impressive array of features aimed at enhancing user experience and streamlining functionalities. Designed with versatility in mind, these models cater to various applications, ensuring that they meet the diverse needs of users across different sectors.

One of the standout features of these models is their advanced connectivity options. Each model utilizes the latest wireless communication technologies, enabling seamless integration with other smart devices. This includes support for Bluetooth Low Energy (BLE) and Zigbee, facilitating efficient communication in IoT ecosystems. The integrated features allow for a more connected environment, whether in smart homes, industrial automation, or healthcare applications.

In terms of processing power, Simplicity’s models incorporate high-performance microcontrollers that not only enhance speed but also optimize energy consumption. This efficient power management is critical for long-lasting device operation, particularly in battery-powered applications. With low quiescent current and sleep modes, these models extend battery life, making them a preferred choice for portable devices.

The user interface experience is also prioritized in these models, with intuitive designs that allow easy navigation and user interaction. Touch-sensitive controls, combined with visually appealing displays, ensure that users can engage with the technology comfortably. This focus on user experience is complemented by a suite of customizable options, enabling users to tailor functionalities according to their specific needs.

Security is another critical characteristic of the Simplicity series. Each model integrates robust security protocols, ensuring data integrity and protecting sensitive information in connected applications. This is particularly significant in sectors like healthcare and finance, where data breaches can have serious implications.

Finally, the modularity of the Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 makes them highly adaptable across various industries. With a range of add-on functionalities and scalability options, these devices can evolve with technological advancements and changing user requirements.

In summary, the Simplicity series encapsulates modern technological trends, marrying advanced connectivity, processing prowess, user-oriented designs, and stringent security measures to meet the demands of today’s diverse applications.
Top Page Image Contents