Simplicity 1694435, 1694439 Troubleshooting, Problem Possible Cause Remedy, Engine fails to start

Models: 1694439 1694435 1693985 1694242 1693984

1 32
Download 32 pages 28.94 Kb
Page 24
Image 24

Troubleshooting, Adjustments, & Service

TROUBLESHOOTING

This section provides troubleshooting and service instructions. Locate the problem and check the possible cause/remedy in the order listed.

Also, refer to the engine manufacturer’s Owner’s Manual for additional information.

For problems not covered here, contact your local dealer.

WARNING

Before performing any adjustment or service to snowthrower, stop the engine and wait for moving parts to stop. Remove the key. To prevent accidental starting, disconnect the spark plug wire and fasten away from the plug.

PROBLEM

 

POSSIBLE CAUSE

 

REMEDY

 

 

 

 

 

Engine fails to start.

1.

Key is OFF.

1.

Push key in to the ON position.

 

2.

Failure to Prime cold Engine

2.

Press Primer Button twice and restart.

 

3.

Fuel valve is in CLOSED position.

3.

Turn valve to OPEN position.

 

4.

Out of fuel.

4.

Fill fuel tank.

 

5.

Choke OFF - cold engine.

5.

Turn choke to ON, set throttle to

 

 

 

 

FAST.

 

6.

Engine flooded.

6.

Turn choke to OFF; try starting.

 

7.

Spark plug not sparking.

7.

Check gap. Gap plug, clean elec-

 

 

 

 

trode, or replace plug as necessary.

 

8.

Water in fuel, or old fuel.

8.

Drain tank (Dispose of fuel at an

 

 

 

 

authorized hazardous waste facility).

 

 

 

 

Fill with fresh fuel.

 

 

 

 

 

Engine starts hard or runs poorly.

1.

Fuel mixture too rich.

1.

Move choke to OFF position.

 

2.

Carburetor adjusted incorrectly.

2.

See your dealer for adjustments.

 

3.

Spark plug faulty, fouled, or gapped

3.

Clean and gap, or replace.

 

 

improperly.

 

 

 

4.

Fuel Cap Vent is blocked.

4.

Clear vent.

 

 

 

 

 

Auger does not rotate.

1.

Auger Control not engaged.

1.

Engage Auger Control.

 

2.

Foreign matter blocking auger.

2. STOP engine and REMOVE the key.

 

 

 

 

DISCONNECT the spark plug wire.

 

 

 

 

Clear auger using a narrow board.

 

 

 

 

See warning in SAFETY RULES.

 

 

 

3.

Tighten to remove slack. See auger

 

3.

Auger drive clutch rod slack.

 

clutch rod adjustment.

 

 

 

4.

Check auger drive belt adjustment.

 

4.

Auger drive belt slipping.

5.

Replace belt.

 

5.

Broken belt.

6.

Replace shear pin.

 

6.

Shear pin broken.

 

 

 

 

 

 

 

20

Page 24
Image 24
Simplicity 1694435, 1694439 Troubleshooting, Problem Possible Cause Remedy, Engine fails to start, Auger does not rotate

1694439, 1694435, 1693985, 1694242, 1693984 specifications

Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 represent a series of innovative solutions in the realm of technology, showcasing an impressive array of features aimed at enhancing user experience and streamlining functionalities. Designed with versatility in mind, these models cater to various applications, ensuring that they meet the diverse needs of users across different sectors.

One of the standout features of these models is their advanced connectivity options. Each model utilizes the latest wireless communication technologies, enabling seamless integration with other smart devices. This includes support for Bluetooth Low Energy (BLE) and Zigbee, facilitating efficient communication in IoT ecosystems. The integrated features allow for a more connected environment, whether in smart homes, industrial automation, or healthcare applications.

In terms of processing power, Simplicity’s models incorporate high-performance microcontrollers that not only enhance speed but also optimize energy consumption. This efficient power management is critical for long-lasting device operation, particularly in battery-powered applications. With low quiescent current and sleep modes, these models extend battery life, making them a preferred choice for portable devices.

The user interface experience is also prioritized in these models, with intuitive designs that allow easy navigation and user interaction. Touch-sensitive controls, combined with visually appealing displays, ensure that users can engage with the technology comfortably. This focus on user experience is complemented by a suite of customizable options, enabling users to tailor functionalities according to their specific needs.

Security is another critical characteristic of the Simplicity series. Each model integrates robust security protocols, ensuring data integrity and protecting sensitive information in connected applications. This is particularly significant in sectors like healthcare and finance, where data breaches can have serious implications.

Finally, the modularity of the Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 makes them highly adaptable across various industries. With a range of add-on functionalities and scalability options, these devices can evolve with technological advancements and changing user requirements.

In summary, the Simplicity series encapsulates modern technological trends, marrying advanced connectivity, processing prowess, user-oriented designs, and stringent security measures to meet the demands of today’s diverse applications.