![](/images/new-backgrounds/1101808/10180841x1.webp)
Maintenance
SCHEDULE
CARE REQUIRED | FREQUENCY | LUBRICATION | |
|
|
| |
Check auger gear case lubrication.** | 25 Hours | Simplicity Winter Weight | |
Worm Gear Oil | |||
|
| ||
|
|
| |
Lubricate snowthrower. | 10 Hours | 10W Oil and Grease | |
|
|
| |
Check tire pressure. | Monthly | N/A | |
|
|
| |
Change engine oil.*✛ | 50 Hours✛ | See Engine Manual | |
|
|
| |
Clean or replace spark plug.✛ | Yearly | See Engine Manual | |
|
|
| |
Check drive linkage/belt tension | N/A | ||
Lubricate Axle Shafts | Yearly | Lithium Grease | |
|
|
|
*Change original oil after two hours of operation.
**Check oil level each fall and spring.
✛See your engine Owner’s Manual.
CHECKING TIRE PRESSURE
The air pressure in each tire should be 20 psi (136 kPa) and should be equal for both tires for best performance. Be sure to keep caps on valves to prevent entry of debris into the valve stem when tires are filled.
Figure 11. Checking Tire Pressure |
CHECK AUGER
GEAR CASE LUBRICATION
1.Place the snowthrower on a level surface.
2.Remove the fill plug (Figure 12).
3.Check the lubricant level. It should be level with the
lower edge of the plug opening. If not, add Simplicity Winter Weight Worm Gear Oil (available from your dealer).
4. | Fill Plug |
|
Figure 12. Checking Auger Gear Case Lubrication
17