FEATURES AND CONTROLS

SNOWTHROWER CONTROLS

A.Speed Select Lever — Allows the operator to use one of five

(5) forward and two (2) reverse speeds. To shift, move

speed select lever to desired position.

NOTICE: Do not move speed select lever while Traction Control is engaged. This may result in severe damage to the drive system.

B.Auger Control Lever — Used to engage and disengage the auger and impeller. To engage push down, to disengage re- lease.

C.Chute Rotation Swtich — Used to rotate the discharge chute to the left or right.

D.Deflector Control Lever — Used to control the angle of the chute deflector (up or down).

E.Free-HandTMControl — After engaging the traction control (left hand) and auger control (right hand), allows the operator to release the auger control lever to use the other controls.

F.Easy-TurnTMTraction Control — When engaged, allows the operator to release the left traction wheel, but allows the right wheel to continue driving for easy turning.

G.Traction Control Lever — Used to propel snowthrower for- ward or reverse. Push down to engage, release to disengage.

H.Grip Warmer Switch — Used to warm the hand grips (high or low).

I.Clean-Out Tool — Used to remove snow and debris from the discharge chute and the auger housing.

J.Skid Shoe — Used to adjust the ground clearance of the auger housing.

K.Headlight — Used to operate the snowthrower in poor light- ing conditions.

Reproduction

Not

for

 

13