SEAT ADJUSTMENT
See Figure 19. The seat can be adjusted forward and back. Move the lever forward, position the seat as desired, and release the lever to lock the seat into posi- tion.
GROUND SPEED CONTROL LEVER ADJUSTMENT
The control levers can be adjusted in two ways. The alignment of the control levers can be adjusted along with the placement of the levers (how close the ends are to one another) can be adjusted.
To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 20) and pivot the lever(s) (C, Figure 20) to align with each other.
To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt (B, Figure 20) in or out to properly adjust the lever end spacing.
SPEED BALANCING ADJUSTMENT
If the rider veers to the right or left when the ground speed control levers are in the maximum forward posi- tion, the top speed of each of these levers can be bal- anced by turning the adjustment bolt(s) (A, Figure 21). Only adjust the speed of the wheel that is traveling faster.
To Reduce the Speed of the Faster Wheel
1.Loosen the securing nut.
2.turn the top speed adjustment bolt COUNTER- CLOCKWISE to reduce the speed.
3.Retighten the securing nut when adjustment is com- plete.
WARNING
DO NOT adjust the tractor for a faster overall speed forward or reverse than it was designed for.
Troubleshooting, Adjustment & Service
Seat Adjustment Lever |
Figure 19. Seat Adjustment
C |
A |
B |
Figure 20. Control Lever Adjustment
A.Alignment Hardware
B.Placement Hardware
C.Ground Speed Control Lever
| FRONT |
C | A |
B |
Figure 21. Top Speed Adjustment
(Right side shown with control cover removed.)
A.Top Speed Adjustment Bolt
B.Control Lever Base
C.Neutral Lock Plate
21
