Simplicity ZT2561 Starter Switch Jumper Cable Starting, Vehicle Battery Jumper Cable To Ground

Models: ZT2561

1 39
Download 39 pages 13.57 Kb
Page 30
Image 30

Troubleshooting, Adjustment & Service

 

THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES

To

To

Starter

Starter

Switch

Switch

 

Jumper Cable

Starting

Discharged

Vehicle

Vehicle

Battery

Battery

 

Jumper Cable

To Ground

MAKE CERTAIN VEHICLES DO NOT TOUCH

Engine Block

Figure 34. Jump Starting

WARNING

Any procedure other than the preceding could result in:

(1)personal injury caused by electrolyte squirting out the battery vents,

(2)personal injury or property damage due to battery explosion,

(3)damage to the charging system of the booster vehicle or of the immobilized vehicle.

Do not attempt to jump start a vehicle having a frozen battery because the battery may rupture or explode. If a frozen battery is suspected, examine all fill vents on the battery. If ice can be seen or if the electrolyte fluid cannot be seen, do not attempt to start with jumper cables as long as the battery remains frozen.

WARNING

For your personal safety, use extreme care when jump starting. Never expose battery to open flame or electric spark – battery action generates hydrogen gas which is flammable and explosive. Do not allow battery acid to contact skin, eyes, fabrics, or painted surfaces. Batteries contain a sulfuric acid solution which can cause serious personal injury or property damage.

When removing or installing battery cables, dis- connect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive ter- minal can be shorted to the frame by a tool.

To avoid engine damage, do not disconnect bat- tery while engine is running. Be sure terminal connections are tight before starting.

28

Page 30
Image 30
Simplicity ZT2561 manual Starter Switch Jumper Cable Starting, Vehicle Battery Jumper Cable To Ground, Engine Block