Lawn Care & Mowing Information
SOLUTIONS FOR COMMON MOWING PROBLEMS
Streaking | Streaking |
Streaking is when thin strips of uncut grass are left behind the mower. Streaking is usually caused by operator error or poor blade maintenance.
CAUSE | SOLUTION |
Blades are not sharp | Sharpen your blades |
|
|
Blades are worn down too far | Replace your blades |
|
|
Engine speed is too slow | Always mow at full throttle |
|
|
Ground speed is too fast | Slow down |
|
|
Deck is plugged with grass | Clean out the mower |
|
|
Not overlapping cutting rows enough | Overlap your cutting rows |
|
|
Not overlapping enough when turning | When turning your effective cutting width |
|
Stepped Cutting | Stepped Cutting |
Stepped cutting is sharp ridges or uneven levels left in |
|
the lawn surface. Stepped cutting is usually caused by |
|
mower deck damage or misadjustment, or damage to |
|
mower blades. |
|
CAUSE | SOLUTION |
Deck is not leveled correctly | Level the deck correctly |
|
|
Tires are not properly inflated | Check and inflate the tires |
|
|
Blades are damaged | Replace the blades |
|
|
Deck shell is damaged | Repair or replace the deck |
|
|
Mower spindle is bent or loose | Repair or replace the spindle |
|
|
Blades are installed incorrectly | Reinstall the blades correctly |
