156998841.qxp 12/13/2006 3:34 PM Page 19
Remove internal membrane from drain spigot. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.
Ensure that the hoses are not kinked, crushed or entangled.
Electrical connection
WARNING!
●Safety standards require the appliance to be earthed.
●Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.
●Always plug the mains plug into a correctly installed approved socket.
●
●If necessary, have the domestic wiring system socket replaced. If the electrical supply cord has to be replaced, contact your local Customer Care centre.
●The plug must be accessible after the appliance has been installed.
●Never unplug the appliance by pulling on the cable. Always pull the plug.
The manufacturer accepts no liability for failure to observe the above safety precautions.
WARNING!
Ensure that the dishwasher has been tested using the rinse & hold or quick 30 cycle and that the dishwasher fills with water, washes and drains with no leaks.
