156998841.qxp 12/13/2006 3:34 PM Page 20
Fitting under a counter
By removing the dishwasher’s worktop, you can install it under a close fitting sink unit or a
Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.
Unscrew the two screws | Push the top backwards | Lift top at the front and |
at the rear. | about 1 cm. | remove it. |
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on either side of the cabinet.
Check if the dishwasher | If not, loosen or tighten |
is levelled. | the adjustable feet until |
| the appliance is |
| perfectly levelled. |
20
