Simrad RGC12 manual Jumper connection for 100/110V AC Mains supply

Installation Manual

3.6 100/110V AC Mains

The Gyrocompass is pre-wired for connection to 220V AC Mains. If the Gyrocompass is connected to 100/110V AC Mains the following jumpers must be connected in the Control Box. Refer to Figure 3-1.

1.On the Power PCB connect the Jumper J1.

2.On the Term PCB connect the Jumper J3.

CONTROL BOX

POWER PCB

J1	Make a jumper at
	J1 and J3 when
	connecting to
TERM PCB	100/110V AC
J3
OPT PCB

Figure 3-1 Jumper connection for 100/110V AC Mains supply

20220737B 15