Robertson RGC12 Gyro Compass
Dynamic limits: | Alignment is retained with heading |
| change rates of up to 12 degrees per |
| second. |
Performance accuracy: Indicates the transmitted heading in 1 degree scale graduations in steps of 1/6 degree resolution.
Environmental specifications
Protection: | Front: IP66 |
| Back: IP54 |
Temperature: | |
Humidity: | 0% to 95% at 40° C |
Noise: | Not greater than 65 dbA |
Installation
General Information
Upon receipt, carefully inspect the packaging for any signs of damage. Record any damage if evident for future reference or action.
Carefully unpack and examine all enclosed items as listed on the accompanying shipping note. Retain the packaging materials for possible future use.
Mounting Instructions
Install the Repeater as follows (Refer to Figure
•Site the RSR77 at the position selected for installation. Ensure suitable shock clearance.
•Prepare for trunnion or panel mounting.
Electrical Installation
Wire the repeater as follows:
•Ensure that all supplies to the ships data cable are isolated before continuing.
•Using suitable crimp terminals. Terminate the repeater to the ships cable via junction box.
•For common negative steps connect polarity to
RED: | +24, 35, 50 or 70VDC |
BLACK: | VDC |
GREEN: | L1 |
BLUE: | L2 |
32 | 20220844B |