INSTRUCTIONS

ISC85X Intelligent Controller

INTRODUCTION:

The ISC85x controller comes ready to use; no setup required. All settings are pre-set at the factory to the customer requirements. The settings can be accessed by the operator if necessary. There are a number of configure / set-up features within the controller. These features include: Turning the scoreboard off/on, setting up the sport and features of the scoreboard, setting the time of day (TOD), setting the contrast on the controller LCD display, and running the scoreboard through a system of tests.

NOTE: These configure features, including this instruction sheet, should be kept from the standard user and only made available to the person in charge of the scoreboard system.

OPERATION:

To enter into configure mode on the controller:

Turn on controller.

Turn RUN/STOP switch to STOP position.

Press and hold the bottom button in the fifth column on the keypad until the configure menu appears (Button to the left of CLEAR). This button may be blank or may be labeled “CONFIG” or “SETUP”.

Select desired option using the numeric keypad.

OPTIONS:

1. Board Off/On:

This blanks the entire scoreboard. This is only required on a few baseball scoreboard models, since the majority will blank on their own 15 seconds after the last communications for the controller.

2. Select Sport/Features:

The first screen selects the sport, follow on screen instructions.

MODEL 52xx SYSTEM NOTE: basketball, volley ball, and wrestling are valid selections.

MODEL 62xx SYSTEM NOTE:

Hockey is only valid selection.

1551 E 11th Street, Loveland, CO 80537 • 970-667-1000 • Fax: 970-667-1032 • www.coloradotime.com

Page 15
Image 15
Singer 5240 manual ISC85X Intelligent Controller