Class 99 & 99K
To Wind the Bobbin
Hold the hand wheel K, Fig. 16, with left hand and with right hand loosen stop motion screw L to disengage stitching mechanism.
Place empty bobbin on bobbin winder spindle, see Fig. 16. Turn bobbin until hole in right side engages pin in spindle. Press bobbin winder downward until latch M, Fig. 17, engages. In this position latch will hold bobbin in place.
Place spool of thread on spool pin 1.
Draw thread through guide 2 on arm of machine. Lead thread from front to rear through lower notch of guide 3.
Thread through O, Fig. 17, in left side of bobbin from inside. The end of the thread must be held by hand until it is broken off by the rotation of the bobbin.
Page 15
Table of Contents Previous Page Next Page
