Device Quickstart Guide
Before you begin
Verify that you have the following:
•SPA2000 (software version 2.0.10 e) and Power Supply
•SPA2000 Cabling
•PC (Initially for configuration of the SPA2000 A PC is used for monitoring and reporting of the Gateway status, but this does not have to be local to the SPA2000)
•A network connection to the Internet
•At least one analogue phone with an RJ11 connector
•Phoneserve literature including:
-Phoneserve Omni Quick Install Guide (this document)
-Phoneserve Omni Account Details (available from your account manager)
-Phoneserve Omni user instructions (available from your account manager)
Cabling the SPA2000
Figure1: Sides of the SPA2000
Connect a standard telephone to either the Phone-1 or Phone-2 port of the SPA2000. The telephone should be a modern tone-dialling (DTMF) type.
Connect the standard RJ45 Ethernet cable (supplied) to the LAN port. The other end of this cable should be connected to your Network feed (Router, Hub, Switch or similar).
Finally, Insert the power adapter cable into the 5V power socket of the SPA and power up the device by plugging the power adapter into a live power outlet.
© Phoneserve. All Rights Reserved Worldwide. | info@phoneserve.com | 2 |
|
|
