Sirius Satellite Radio 04H8095 manual Connecting to a Netware 4.11 Server

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

Windows for Workgroups

2 Connecting to a Netware 4.11 Server

Requirements

•HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

•IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04.

•Driver Name: IBMMPC.DOS Size: 60KB Date: 4/4/97

•Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

•Netware client for DOS and MS-Windows.

Device Configuration

	Vectra VL8	Vectra VL7	Vectra VE7/VE8
Interrupt	11	11(10)	10(11)
I/O Address	F800-h	C800h	DC00-h

Procedure

1With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot.

2Insert the IBM LANStreamer TR drivers disk 2 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.

3After the machine boots, verify that the adapter finished testing and that the adapter is “OK.”

4Click on “F3” to exit, and then press “CTRL+ALT+DEL.”

5Boot the machine to a DOS prompt, and Netware client for DOS and MS- Windows disk 1.

6Execute INSTALL.EXE and set lines 1-5 as listed below;

❒C:\NWCLIENT

❒YES

❒YES

C:\WINDOWS