17
Home Signal Distribution Kit Installation Guide
After Multiswitch Conguration (Multiswitch Inside the Home)
When the multiswitch is located inside the home, a cable from the SIRIUS anten-
na needs to be installed and run to the vicinity of the multiswitch inside the home.
There the SIRIUS signal and satellite TV signal from the output of the multiswitch
are combined on one common cable. The combined signal is carried all the way
into the room where the SIRIUS radio and satellite TV receiver/tuner are located,
where the signals are then split and connected to each device. The benet of the
SIRIUS Combiner/Splitter in this scenario is avoiding having to run an additional
cable for the SIRIUS radio through the interior of the home.
When installing the Combiner and Splitter after the multiswitch, you will have to
determine which satellite TV cable from the multiswitch feeds the room where
you want to locate your SIRIUS radio.
The following illustration shows the installation of the Combiner/Splitter after the
multiswitch inside the home.
Adapter
Cable
SaTellITe DISH
mUlTISWITCH InSIDe Home
oUTDooR anTenna
SaTellITe RaDIo
SPlITTeR

S

Common
CaBle RUn
ComBIneR
mUlTISWITCH
C
m
TV
TVTV