Buffalo Technology WHR-G54S user manual Here’s the whole setup, ready for initial configuration

Configuring a WDS Bridge

Connect a PC’s Ethernet port to another RJ-45 port on the main router (the first AirStation). You will use this PC to configure the settings of the AirStations.

Here’s the whole setup, ready for initial configuration.

*Note: Each AirStation may be part of 6 different bridges. Remember that each layer of bridges takes about half your total network speed, so avoid configuring daisy-chains more than 4 bridges long. A star-pattern is always better, with a central router serving multiple bridges.

68