b. Power the Stiletto on. When it is completely powered up, press the FM FM button on the left side of the vehicle dock or press the FM button on the remote control.

c.Use the Media Dial or the buttons on the remote control to select the same FM channel. (Figure 26) Press and hold a preset number (0—9) on the vehicle dock in which you want to store the selected FM channel as a preset. (Figure 27) Press the Select button to exit and transmit on the selected FM channel. The Stiletto will transmit on the selected FM channel.

FM Transmit

Turn the Media Dial to change the frequency.

Use the number keys to recall or assign FM presets

90.1

Figure 26

FM Transmit

Turn the Media Dial to change the frequency.

Use the number keys to recall or assign FM presets

90.1FM1

Figure 27

Note: The FM transmitter in your SIRIUS radio is automatically set to FM channel 88.1. This may not be the best channel in your area.

Tip: If you regularly travel between cities with different active FM channels, you may need to find channels that are not broadcasting in each city. The Stiletto can store multiple FM transmit channels as presets, so you can easily switch to the best FM channel for each city. You will also want to set the FM channels that are not broadcasting in each city as presets on your vehicle radio.

5.You should now hear the audio from your SIRIUS radio over your vehicle’s FM radio. If the audio quality is not satisfactory, try moving the FM Extender Cable slightly to see if a better signal can be obtained.

6.If you are mounting the FM Extender Cable in the headliner of the vehicle, skip this step. When you are satisfied with the mounting location, remove the suction cup mounts and peel the backing off the adhesive mounts. Permanently adhere it in the same position on the glass (or A-Pillar), keeping it taut and as straight as possible. (Figure 28)

[ Installation ] 37

Page 37
Image 37
Sirius Satellite Radio Stiletto Vechicle Kit Satellite Radio manual 90.1 FM1