SV1 Receiver User and Installation Guide
26
3.A 6 segment horizontal bar graph will be
displayed with a “-“ sign to the left and a “+” sign
to the right. The SAT screen indicates the
satellite signal strength while TER screen
indicates the terrestrial signal strength, if a
terrestrial signal is available.
To exit the Signal Level menu, press the MENU
button.
Factory Default
The Factory Default option will restore most every
feature of the Receiver to the original factory
settings. The following is a list of all features
affected by the Factory Default option:
• All Presets are cleared
• Receiver set to Normal Tuning Mode
• Display brightness set to 50%
• Display Contrast set to 50%
• FM Transmitter set to On
• FM Frequency set to 88.1 MHz
Note that the Parental Control feature is not affected
by the Factory Default option. If a code has been set
for the Parental Control feature, the code will not be
reset by the Factory Default feature, preventing
someone from circumventing the Parental
Control feature. Channels which have been
locked will remain locked.
To activate the Factory Default feature, and
restore the features of the Receiver to the factory
defaults, do the following:
1. Use the channel up and down buttons to
display the “Factory Default” menu option,
and press the select button.
2.Use the channel up and down buttons to
display “Yes” to restore all settings to the
settings from the factory, or display “No” to
leave them as-is and return to the Menu
Options menu.
?ts e YR e ?ts e NR e