SM 1619X04759 11-12_SM 1619X04759 11-12.qxp 11/20/12 2:05 PM Page 16

Trouble Shooting

!WARNING

PROBLEM

Read instruction manual first! Remove plug from the power source before making adjustments or assembling the blade.

TROUBLE: SAW WILL NOT START

1.Power cord is not plugged in.

2.Power source fuse or circuit breaker tripped.

3.Cord damaged.

4.Burned out switch.

5.Trigger does not turn tool on.

REMEDY

1.

Plug saw in.

 

2.

Replace fuse or reset tripped circuit breaker.

 

3.

Inspect cord for damage. If damaged, have cord replaced by an Authorized Skil

 

Service Center or Service Station.

 

4.

Have switch replaced by an Authorized Skil Service Center or Service Station.

 

5.

Have switch replaced by an Authorized Skil Service Center or Service Station.

 

TROUBLE: BLADE DOES NOT COME UP TO SPEED

PROBLEM

1.

Extension cord too light or too long.

 

2.

Low house voltage.

REMEDY

1.

Replace with adequate cord.

 

2.

Contact your electric company.

 

TROUBLE: EXCESSIVE VIBRATION

PROBLEM

1.

Blade out of balance.

 

2.

Workpiece not clamped or supported properly.

REMEDY

1.

Discard Blade and use different blade.

 

2. Clamp or support workpiece as shown on pages 10 and 13.

 

TROUBLE: CANNOT MAKE SQUARE CUT WHEN CROSSCUTTING

PROBLEM

1.

Foot not adjusted properly.

REMEDY

1. See “Operating Instructions” section, “Bevel Adjustment” (page 10), “Line Guide”

 

(page 10, “Cutting Large Sheets (page 13) and “Rip Cuts” (page 13).

TROUBLE: CUT BINDS, BURNS, STALLS MOTOR WHEN RIPPING PROBLEM 1. Dull blade with improper tooth set.

2.Warped board.

3.Blade binds.

4.Improper workpiece support.

REMEDY 1. Discard blade and use a different blade.

2.Make sure concave or hollow side is facing “DOWN” feed slowly, see (page 13).

3.Assemble blade and tighten Vari-Torque clutch per “Assembly Instructions”, see (page 9)

4.Clamp or support workpiece as shown on pages 10 and 13.

TROUBLE: BLADE SLIPPING

PROBLEM 1. Tool does not cut workpiece.

REMEDY 1. Assemble blade and tighten Vari-Torque clutch per “Assembly Instructions”, see (page 9)

-16-

Page 16
Image 16
Skil MAG77LT manual Trouble Shooting

MAG77LT specifications

The Skil MAG77LT is a powerful and versatile tool designed for both professional contractors and DIY enthusiasts. This magnesium-framed circular saw is a standout in the market, combining lightweight design with the ability to handle tough cutting tasks with ease. Weighing just 8.5 pounds, the MAG77LT is among the lightest saws in its class, making it easy to transport and maneuver, especially during extended use.

One of the key features of the Skil MAG77LT is its robust 15-amp motor, which delivers an impressive speed of up to 5,300 RPM. This high speed ensures that the saw can make quick and clean cuts through various materials such as plywood, laminate, and hardwood. The tool is equipped with a 7-1/4 inch carbide-tipped blade, which not only enhances cutting efficiency but is also durable enough to withstand rigorous use.

Featuring a magnesium housing, the MAG77LT is designed for maximum durability without sacrificing weight. Magnesium is known for its strength-to-weight ratio, making this saw resistant to significant wear and tear. The ergonomic design of the tool also includes a comfortable grip, allowing users to maintain control even during extended cutting sessions.

Another notable technological advancement in the Skil MAG77LT is its built-in dust blower, which helps keep the cutting line clear of debris. This feature enhances visibility and precision, ensuring that users can make accurate cuts without interruptions. The saw also includes an adjustable bevel capacity that allows for precise angled cuts, with settings ranging up to 56 degrees.

Further enhancing its usability, the Skil MAG77LT features an integrated safety switch. This ensures that the saw won't accidentally start, providing an extra layer of protection for the user. Additionally, the saw's power cord is designed to be flexible, reducing the risk of tangling and allowing for greater freedom of movement while cutting.

In summary, the Skil MAG77LT is a top-tier circular saw that beautifully marries lightweight design with powerful performance. It caters to a wide array of cutting tasks, making it an ideal choice for both professionals and DIYers. With features like a powerful motor, durable magnesium construction, versatile bevel adjustments, and user-friendly safety features, the MAG77LT continues to stand out as a reliable and efficient cutting tool in the market.