ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
10. Each light has 4 control buttons: On / Off / Bright / Dim
•Press the [ON] button to turn on that light.
•Press the [OFF] button to turn off that light.
•Press the [Bright] button to increase the brightness of that light.
•Press the [Dim] button to decrease the brightness of that light.
Note: To change the brightness, make sure the Wireless Module and the load (i.e. the light bulb) are dimmable.
11.You can setup a camera to view live images of this zone. Please refer to the ‘Settings page’ to setup a wireless camera.
12.To program the zone control, go to the Zone page and click [Settings].
You will see the following screen. For instance, in the Kitchen zone, there are 4 lights. First put the Island Light Module into learning mode, then press the [Learn] button on this screen. Next put the Spot Light module into learning mode, then press the same [Learn] button on this screen again. Repeat this step for all the modules in the [Kitchen] zone.
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB | 10 |
|
|
|
|