ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
To setup the Internet Hub to control SkylinkHome™ Wireless Modules, follow the steps below:
1.Assign different zones such as Kitchen, Bedroom, Family Room, Hallway etc.
2.Assign different devices in each zone, such as island lights, ceiling lights, pot lights, floor lamp etc.
3.Learn the assigned light to the Wireless Module
Assign Zones and Lights
1.Click the Zone icon or [Zone] in the toolbar.
2.Click the [Settings] icon to change the name of the zone.
3.Enter the zone name, (e.g. Kitchen), then click [ADD].
Repeat this step for all the zones that you plan to assign.
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB | 7 |
|
|
|
|
