SkyLink R4G manual Advanced Features, Press Display Then enter 1 or

3. OPERATION (CONT)

Advanced Features

Relay Trigger Selection: NO/NC/Toggle
Display		1		Display
ADV ->	->		->	then enter;
SET
Press		Press

[1]for NO – the RELAY LED will stay off.

[2]for NC – the RELAY LED will stay on.

[3]for Toggle – the RELAY LED will subject to previous relay setting. If the relay is in NO, then the RELAY RELAY LED will change to on. If the relay is in NC, then the RELAY LED will keep stay on. After activated,

If hear 3 beeps, confirmed the change in relay trigger setting.

LED will keep stay off. After activated, the the RELAY LED will change to off.

Note: The factory default is set to NO.

Relay Trigger Pulse Duration

To change the setting:
ADV		Display	2 ->	Display
	->	->		then enter;
SET
Press			Press

[1]for 0.3 second

[2]for 0.5 second

[3]for 1.0 second

[4]for 2.0 seconds

[5]for 5.0 seconds

If hear 3 beeps, confirmed the change in relay trigger duration setting.

Note : The factory default is 0.3 second.

Enable / Disable Beeping

To change the beep setting:

Display	-> 3 ->	Display
SETADV ->		then enter;
Press	Press

[1]enable beeping

[2]disable beeping

If hear 3 beeps, confirmed the change in beep setting.

Note : The factory default is Enable.

Erase/Format memory

The memory can be completely erased or formatted.

To erase/format memory:

ADV

SET

Press

Display	Display	then enter 1 or 2 ->	Display
->	-> 0 ->		->
	Press	Press

[1]to erase the1st memory

[2]to erase the 2nd memory

If hear 3 beeps, confirmed the memory content is copied. You need to restart the unit by disconnecting the power supply then reconnects it again.

–3–