Kenwood KDC-PS909 Tuner features See page, Tuning, Station Preset Memory, Auto Memory Entry

English

Tuner features (See page 6)

Tuning				Station Preset Memory
You can choose from three tuning modes: auto seek, preset				Store the frequency of the station currently being listened to.
station seek, and manual. The “AUTO1” indicator lights up				You can then recall that station with a single touch of a
when auto seek tuning is selected, and the “AUTO2” indicator				button.
lights when preset station seek tuning is selected.			1			Select the band/ station that you want to have stored.
Selecting Tuning Mode:
			2			Hold down the button (#1-6) that you want to use for the
		Press the AUTO button.
						station, for two seconds or more.
		Each time you press the AUTO button, the mode switches as
						The button number blinks once in the display to indicate that
		follows.
						the data has been stored.
		▼
				Recalling a Preset Station:
		AUTO 1 (Auto Seek Tuning)
						Press the preset station button (#1-6) for the desired station.
		▼
		AUTO 2 (Preset Station Seek Tuning)				The number of the recalled station is displayed.
		▼
		MANUAL (Manual Tuning)			NOTE
					You can store 6 stations in each of the FM1, FM2, FM3, and AM
Tuning:					bands.
1		Press the SRC button repeatedly until tuner mode is obtained.
		"TUNER" is displayed when the tuner mode has been selected.
2		Press either the FM or AM button to select the band.
		Each time you press the FM button, the band switches		Auto Memory Entry
		between the FM1, FM2 and FM3.		You can automatically store all the receivable frequencies in
		Press the AM button to select the AM band.		the band currently being listened to, and then recall them with
3		• Auto Seek Tuning		the touch of a button later. This function is especially useful
		Press the ¢ button to seek increasing frequencies.		when you are travelling and do not know what stations are
				available. Up to 6 frequencies can be stored this way.
		Press the 4 button to seek decreasing frequencies.
		• Preset station seek tuning	1			Select the band for auto memory entry.
		Press the ¢ button to move to the next preset station (i.e.,	2			Hold down the AME button for two seconds or more to start
		the one with the next highest number), and the 4 button to
		move to the last preset station (i.e., the one with the next				auto memory entry.
		lowest number).				The numbers of the preset station buttons are shown in order.
		• Manual Tuning				When all the stations in a certain band are stored in the preset
		Press the ¢ button to increase the frequency by one step.				memory, the auto memory entry stops. The tuner then plays
		Press the 4 button to decrease the frequency by one step.				the last station received.
				Recalling a Preset Station:
	NOTE
						Press the preset station button (#1-6) for the desired station.
	The ST indicator lights up when stereo broadcasts are being
						The number of the recalled station is displayed.
	received.

— 12 —