Kenwood KDC-PS909 Direct Access Tuning, Preset station seek with Programme service name

Models: KDC-PS909

1 40
Download 40 pages 27.14 Kb
Page 15
Image 15
Direct Access Tuning

Function of remote control with number/letter entry buttons (KCA-R6A : Optional)

Direct Access Tuning

When you already know the frequency of the station that you want to listen to, you can enter it directly for quick access.

1Select the band by pressing the FM or AM button.

2Press the DIRECT button.

The frequency part of the display blinks for 10 seconds.

If you make no input in the 10-second period, direct access tuning is automatically cancelled.

3Enter the frequency of the desired station whilst the display is blinking.

If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1.

If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0.

NOTE

When a frequency which cannot be received is input, this frequency is not verified and operation returns to the original frequency input mode.

FM frequencies can only be input in 0.1 MHz steps, and not in 0.01 steps.

Cancelling Direct Access Tuning:

Press the DIRECT button again.

Function of remote control with DNPP button (KCA-R6A : Optional)

Preset station seek with Programme service name

You can search for the preset station with Programme Service name.

1Press the DNPP button on the remote control.

“SNP PLAY” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened to are displayed for 5 seconds each.

The display band switches in the following order:

=FM1 ï FM2 ï FM3 ï AM +

Each time you press the TUNE+ button, the station display switches in the forward direction.

Each time you press the TUNEbutton, the station display switches in the reverse direction.

Stations which have no names will be displayed as frequencies.

NOTE Changing the Displayed Band

Pressing the FM button switches between the FM1, FM2, FM3 and AM displays, in that order.

Pressing the AM button switches between the displays in the reverse direction.

2Once the name is displayed for the station you want to listen to

Press the OK button.

Reception starts of the displayed station, and the seek mode ends.

Cancelling mode during input:

Press the DNPP button.

The seek mode is cancelled.

— 15 —

Page 15
Image 15
Kenwood KDC-PS909 instruction manual Direct Access Tuning, Preset station seek with Programme service name