Fujitsu Siemens Computers 4312 FA manual VESA-DDC-compatible VGA interface, Preset operating modes

Colour monitor 4312 FA

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 4312 FA is not yet displayed in the list of monitors, you can select the
	following monitor instead:
	Siemens or Siemens Nixdorf 4311 FA, 4611 FA 4612 FA or 461 V

Preset operating modes

The picture position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

Horizontal frequency	Refresh rate	Screen resolution
31,47 kHz	70.00 Hz	640 x 350
31,47 kHz	70.00 Hz	720 x 400
31,47 kHz	60.00 Hz	640 x 480
37,50 kHz	75.00 Hz	640 x 480
37,88 kHz	60.30 Hz	800 x 600
46,87 kHz	75.00 Hz	800 x 600
48,36 kHz	60.00 Hz	1024 x 768
60,02 kHz	75.00 Hz	1024 x 768
60,00 kHz	60.00 Hz	1280 x 1024
79,98 kHz	75.00 Hz	1280 x 1024

For ergonomic reasons, a screen resolution of 1024 x 768 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz.

i	Because of the technology used (active matrix) an LCD monitor provides a totally flicker-
	free picture even with a refresh rate of 60 Hz.

Power supply plug

0 V + 14 V DC

S26361-K841-V150-1-5E19 English - 19