Colour monitor 4312 FA

Switching full-screen mode on or off

Calling the Image Size setting window (activate with MENU button).

If your graphic card is only capable of displaying a resolution lower than

1280 x 1024, the scaling process of the monitor can extend the addressability to 1280 x 1024 pixels by determining intermediate values (with interpolation). (Expand1) (Expand2)

Setting language for the OSD menu

Calling Language setting window (activate with MENU button).

You can choose from English (default setting), German, French, Italian and Spanish.

Setting transparency for the OSD menu

Transparency for the OSD menu (Halftone)

Off = The normal screen display is covered by the OSD menu.

On = The OSD menu is transparent.

Setting position for the OSD menu

Calling the Menu Position setting window

With Horizontal you can move the OSD menu horizontally, and with Vertical vertically on the screen.

Setting display time for the OSD menu

Calling the Display Time setting window

You can select between 5, 10, 20 and 200 seconds. If the adjusted time has run out without the settings being saved, the OSD menu is automatically closed.

Displaying the monitor settings

i

Displaying horizontal frequency, refresh rate and resolution of the current monitor setting

Selecting video signal source

A

B

With the OSD menu hidden you can make the following settings with the EXIT button:

A:switch on the analogue mode. The monitor processes the signals of the analogue port (VGA/D-SUB).

Or

B:switch on the digital mode. The monitor processes the signals of the digital port (DVI-D).

16 - English

S26361-K841-V150-1-5E19

Page 19
Image 19
Fujitsu Siemens Computers 4312 FA manual Switching full-screen mode on or off, Setting language for the OSD menu