Kenwood KDC-PS909 instruction manual Disc Changer, English, Troubleshooting Guide

English

Troubleshooting Guide

PROBLEM	POSSIBLE CAUSE	SOLUTION
A CD ejects as soon as it is	The CD is upside-down.	Load the CD with the labelled side up.
loaded.
	The CD is quite dirty.	Clean the CD, referring to the section on "Cleaning CDs" (see
		page 5).
The sound skips on a CD.	The CD is scratched or dirty.	Clean the CD, referring to the section on "Cleaning CDs" (see
		page 5).
The specified track does not	Random play has been selected.	Turn off the random play function.
play.

Disc Changer

PROBLEM	POSSIBLE CAUSE	SOLUTION
The disc changer mode cannot	No cable has been connected to the disc changer input	Connect the cable to the disc changer input terminal on the
be selected.	terminal on the unit.	unit.
	The O-N selection switch of the disc changer is not set	Set the O-N selection switch to "O" position.
	properly.

The specified disc does not play, but another one plays instead.

The specified CD is very dirty.	Clean the CD.
The CD is upside-down.	Load the CD with the labelled side up.
The disc is loaded in a different slot from that specified.	Eject the disc magazine and check the number for the
	specified disc.
The disc is severely scratched.	Try another disc instead.

The sound skips.	Something is touching the disc changer.	Remove whatever is touching it.
	The CD is scratched or dirty.	If skipping happens at the same place when the car is
		stopped, something is wrong with the CD. Clean the CD.
The display shows that the	The computer chip in the unit is not functioning normally.	Press the reset button on the unit (see page 4).
changer is being played, but no
sound can be heard.
The specified track does not	Random play or magazine random play has been selected.	Turn off the random play or magazine random play function.
play.

— 38 —